|Problems With Cast Iron Tub Finish|
|You are here: Home » News » Problems With Cast Iron Tub Finish|
Problems With Cast Iron Bathtub Roughcast Finish Bare Tubs Porcelain Coatings Solutions Considerations
Bare cast iron bathtub isn't suited for new finishes. Before they'll accept an epoxy or enamel finish coating, they require priming. Unfortunately, ordinary primers don't bond to cast iron. A metal etching primer is required for these types of tubs. If the finish on your cast iron tub is failing, it's probably because you or someone else applied the finish directly over top of the bare cast iron; or it could be because you used the wrong type of primer.
Many cast iron tubs are coated with porcelain. Like cast iron, porcelain is ill-suited for new finishes. Before the porcelain coating will accept a new finish, it requires abrasion. Professionals sand porcelain to create a rougher surface, better suited for primer adhesion. Once the porcelain-coated tub is abraded, it will accept an acrylic primer. If the finished porcelain on your cast iron tub is failing, it's likely because you or someone else forgot to abrade the porcelain or failed to apply a base primer.
If the existing finish on your cast iron tub is failing, you must refinish it. Scrape loose particles from the tub using a metal putty knife. Abrade the existing finish with sandpaper, or the new finish won't stick. If areas of bare cast iron are showing, prime them with an etching primer. Once all these steps are taken, you may apply a fresh enamel or epoxy finish.
Sometimes, improper cleaning can lead to finish failure. Dirt, oil and soap scum will prevent adequate adhesion. Be sure to degrease the tub before applying the fresh finish.
Problems With Cast Iron Bathtub Roughcast Finish